Hella Universal Electric Vacuum Pump - HL95301, HL95302 SKU: HL9530

Applications:

• Designed to supplement diesel engines in controlling heating and cooling functions, door locks, cruise controls, trunk release or any other functions controlled by vacuum. 

Features:

• 12V DC 
• Sealed motor (inlet port, outlet and pump end) 
• Environmentally tested; humidity, salt, fog dust, air and water leakage 
• Meets on (1) meter (3.28 feet) drop test 
• Electrical Terminals: meet axial force (push/pull) of 40-45 pounds 
• Vibration tested: eight (8) hours per plane; amplitude (peak to peak) 1.27 mm (0.05 in.) 
• Electrical Stress Tested; Load Dump, Reverse Voltage, Short to Power Ground, non-disruptive transients and stall 
• Meets standard corrosion test ASTM-B 117 
• Temperature Range: -25°C to +96°C 
• Weight: 13 grams (11 oz.) 
• Chemical Resistant: 50/50 water, ethylene glycol antifreeze, Dexcon II transmission fluid, Leaded or unleaded regular gasoline, Diesel fuel, Dot 3 hydraulic brake fluid, Ethanol, 25% methanol +5% liquid soap in water 

Specifications:

• Evacuate a 40 cubic inch (minimum) reservoir from atmoshere pressure to 15 inches of mercury vaccum in maximum of 20 seconds. 
• Internal switch turns motor off when the vacuum reaches a maximum of 15 inches of mercury. When vacuum is reduced to a minimum of 11 (+2 or -0) inches of mercury, the internal switch will reactivate the motor to increase vacuum. 
• Motor draws no more than .65A @ 13.5VDC (average). 

Part Numbers:

• Universal Electric Vacuum Pump Type 1 w/Connector Interface - H81953011
• Universal Electric Vacuum Pump Type 2 w/Quick Connect Terminals - H81953021